M/T Shift Arm Clearance Inspection
1.
Measure the clearance between the shift arm (A) and shift piece (B) with a feeler gauge (C). If the clearance exceeds the service limit, go to
2
.
Standard:
0.20-0.61 mm (0.008-0.024 in.)
Service Limit:
0.7 mm (0.028 in.)
2.
Measure the diameter of the shift piece.
If the diameter is not within the standard, replace the shift piece.
If the diameter is within the standard, replace the shift arm.
Standard:
16.00-16.20 mm (0.630-0.638 in.)