| 1. | Remove the air cleaner housing and air intake duct. |
| 2. | Disconnect the ATF warmer hose (A) from the ATF filter (B).
|
| 3. | Remove the ATF filter holder (C). |
| 4. | Remove the bolt (D) securing the ATF inlet line (E). |
| 5. | Remove the joint bolt (F) from the ATF inlet line. |
| 6. | Disconnect the ATF filter from the ATF warmer hose (G), and replace it with new one. |
| 7. | Slide the ATF warmer hose on the new ATF filter until the hose end contacts the filter housing, and secure the hose with the clip (H) at 6-8 mm (0.24-0.31 in.) (I) from the filter housing. |
| 8. | Install the ATF filter and ATF inlet line/hose with the joint bolt and new sealing washers (J). |
| 9. | Secure the ATF filter with the ATF filter holder and the bolt. |
| 10. | Slide the ATF warmer hose on the ATF filter until the hose end contacts the filter housing, and secure the hose with the clip (K) at 6-8 mm (0.24-0.31 in.) (L) from the filter housing. |
| 11. | Install the air intake duct and air cleaner housing. |