| 1. | Remove the 2nd clutch transmission fluid pressure switch (A).
|
| 2. | Make sure there is no water, oil, dust, or foreign particles inside the connector. |
| 3. | Install the new 2nd clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the metal part of the switch. |
| 4. | Remove the 3rd clutch transmission fluid pressure switch (C). |
| 5. | Make sure there is no water, oil, dust, or foreign particles inside the connector. |
| 6. | Install the new 3rd clutch transmission fluid pressure switch and a new sealing washer (D), and tighten the metal part of the switch. |