| 1. | Remove the air cleaner housing and air intake duct. |
| 2. | Remove the mounting bolts securing the harness cover (A), and remove the harness clamp (D).
|
| 3. | Disconnect the connectors from A/T clutch pressure control solenoid valve B and C. |
| 4. | Remove the A/T clutch pressure control solenoid valve B and C.
|
| 5. | Remove the ATF pipe (A), ATF joint pipes (D), O-rings (E), and gasket (F). |
| 6. | Clean the mounting surface and fluid passages of the A/T clutch pressure control solenoid valves B and C and transmission housing. |
| 7. | Install the new gasket with blue side down; white side up on the transmission housing. |
| 8. | Install the ATF pipe and ATF joint pipes, and install the new O-rings over the ATF joint pipes. |
| 9. | Install the A/T clutch pressure control solenoid valve B and C. |
| 10. | Check the A/T clutch pressure control solenoid valve B and C connector for rust, dirt, or oil, then connect the connectors securely. |
| 11. | Secure the harness cover with the mounting bolts, and install the harness clamp. |
| 12. | Install the air intake duct and air cleaner housing. |