| 1. | Securely clamp the countershaft assembly in a bench vise with wood blocks.
|
| 2. | Remove the special bolt (left-hand threads). |
| 3. | Support the ball bearing (A) on steel blocks, then use a press (B) and an attachment (C) to press the countershaft out of the ball bearing.
|
| 4. | Remove the 35 mm shim and the distance collar. |
| 5. | Support 4th gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of 5th gear.
|
| 6. | Support 2nd gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of 3rd gear.
|