| 1. | Disconnect the negative cable from the battery, then disconnect the positive cable. |
| 2. | Remove the battery hold-down bracket, and remove the battery and battery tray. |
| 3. | Remove the air intake duct and air cleaner housing. |
| 4. | Remove the battery base and resonator. |
| 5. | Disconnect the 3rd clutch transmission fluid pressure switch connector, then remove the 3rd clutch transmission fluid pressure switch (A).
|
| 6. | Make sure there is no water, oil, dust, or foreign particles inside the connector. |
| 7. | Install the new 3rd clutch transmission fluid pressure switch with a new sealing washer (B), and tighten the metal part of the switch. |
| 8. | Connect the connector securely. |
| 9. | Install the battery base and resonator. |
| 10. | Install the air cleaner housing and air intake duct. |
| 11. | Install the battery tray and battery, then secure the battery with its hold-down bracket. |
| 12. | Connect the battery terminals, and apply grease around the battery terminals. |
| 13. | Do the power window control unit reset procedure. |