| 1. | Remove the air intake duct and air cleaner housing. |
| 2. | Disconnect the A/T clutch pressure control solenoid valve B and C connectors. |
| 3. | Remove the mounting bolts and the A/T clutch pressure control solenoid valve B and C.
|
| 4. | Remove the ATF joint pipes (D), O-rings (E), and gasket (F). |
| 5. | Clean the mounting surface and fluid passage of the A/T clutch pressure control solenoid valve B and C and transmission housing. |
| 6. | Install the new gasket on the transmission housing, and install the ATF joint pipes. |
| 7. | Install the new O-rings over the ATF joint pipes. |
| 8. | Install the new A/T clutch pressure control solenoid valve B and C, and harness clamp brackets. |
| 9. | Check the A/T clutch pressure control solenoid valve B and C connector for rust, dirt, or oil, then connect it securely. |
| 10. | Install the air cleaner housing and air intake duct. |