Trunk Lid Opener Cable/Fuel Fill Door Opener Cable Replacement

• Put on gloves to protect your hands.
  
• Take care not to scratch the body and related parts.
  

1.

Remove these items: Rear seat cushion: Fold down/split fold down Fixed Rear seat side bolster, fold down/split fold down Rear seat-back, fix type rear seat Front door sill trim, driver's sides Kick panel, driver's sides Rear door sill trim, both sides Center pillar lower trim: Without side curtain airbags With side curtain airbags Trunk side trim panel, left side: Without trunk floor spacer With trunk floor spacer Trunk lid trim (for some models) Trunk lid opener/fuel fill door opener

2.	Pull the carpet back as needed.

3.	Release the opener cable (A) from the clips (B). Remove the cushion tape (C). LHD  RHD

4.	While pinching the hooks (A) from inside the vehicle, remove the grommet (B) from the body.

5.	Release the hook (A), then remove the grommet (B) from the fuel fill door latch (C).

6.	Remove the fuel fill door opener cable from inside the body.

7.	Detach the opener cable junction box (A) from the body.

8.	Disconnect the trunk lid opener cable (B) from the trunk lid latch (C).

9.	Release the trunk lid opener/fuel fill door opener cable from the clips.

10.	Remove the trunk lid opener/fuel fill door opener cable from the vehicle. Take care not to kink the cable.

11.	Install the opener cable in the reverse order of removal, and note these items: Align the marks (A) on the opener cable (B) with the cable clips (C) and cushion tape (D) as shown. Replace any damaged clips, and replace the cushion tape. LHD  RHD