Rear Seat Armrest Cover Replacement

Fold Down/Split Fold Down - For Some Models

1.	Remove the armrest from the seat-back.

2.	Remove the armrest beverage holder from the armrest.

3.	Release the clips (A) and hook strip (B), and pull back the armrest cover (C) all the way around.

4.	Release the armrest cover from the armrest pivot portions (A), then remove it from the pad (B).

5.	Install the cover in the reverse order of removal. To prevent wrinkles when installing an armrest cover, make sure the material is stretched evenly over the pad before securing the clips and hook strips.

Fixed - For Some Models

1.	Remove the armrest from the seat-back.

2.	Remove the armrest beverage holder from the armrest.

3.	Remove the E clips (A), then remove the brackets (B) from both sides of the armrest (C).

4.	If necessary, remove the bushings (D) from the brackets.

5.	Release the clips (A) and hook strip (B), and pull back the armrest cover (C) all the way around.

6.	Release the armrest cover from the armrest pivot portions (A), then remove it from the pad (B).

7.	Install the cover in the reverse order of removal, and to prevent wrinkles when installing an armrest cover, make sure the material is stretched evenly over the pad before securing the clips and hook strips.