| 1. | Make sure you have the anti-theft code for the radio or the navigation system, then write down the customer's audio presets. |
| 2. | Disconnect the negative cable from the battery first, then disconnect the positive cable. |
| 3. | Remove the drive belt. |
| 4. | Remove the bulkhead cover. |
| 5. | Disconnect the fan motor connectors (A) and hood switch connector (B), then remove the harness clamps (C).
|
| 6. | Remove the reservoir hose (A), radiator cap base mounting bolts (B), clips (C) and radiator upper brackets (D).
|
| 7. | Remove the condenser bracket mounting bolts (A), then remove the bulkhead (B).
|
| 8. | Remove the three bolts securing the alternator.
|
| 9. | Disconnect the alternator connector (A), BLK wire (B) and harness clamp (C) from the alternator, then remove the alternator.
|
| 1. | Connector the alternator connector (A), BLK wire (B) and harness clamp (C) to the alternator.
|
| 2. | Tighten the three bolts securing the alternator.
|
| 3. | Install the bulkhead (A), then install the condenser bracket mounting bolts (B).
|
| 4. | Apply body paint to the bulkhead mounting bolts. |
| 5. | Install the radiator upper brackets (A), radiator cap base mounting bolts (B), reservoir hose (C), and Clips (D).
|
| 6. | Connect the fan motor connectors (A) and hood switch connector (B), then install the harness clamps (C).
|
| 7. | Install the bulkhead cover. |
| 8. | Install the drive belt. |
| 9. | Connect the positive cable to the battery first, then connect the negative cable. |
| 10. | Enter the anti-theft code for the radio or navigation system, then enter the customer's audio preset. |
| 11. | Set the clock. |
| 12. | Do the power window control unit reset procedure. |