| 1. | Carefully pry out the master switch (A).
|
| 2. | Disconnect the 20P connector (B) from the power window master switch. |
| 3. | Check for continuity between the terminals in each switch position according to the tables. Driver's Switch The driver's switch is combined with the control unit so you cannot isolate the switch to test it. Instead, run the master switch input test procedures 3, 4, 15, and 20. If the tests are normal, the driver's switch must be faulty. Replace the switch. Front Passenger's Switch Left Rear Switch Right Rear Switch |
| 4. | If the continuity is not as specified, remove the screws and replace the switch. |